RTB 4100 Single Shaker Platelet Incubator

Rugged and reliable, the RTB 4100 bench standing platelet bag incubators are designed to give many years of trouble free continuous use.

The air in the chamber is continuously renewed by a special pump to provide optimum oxygen exchange whilst the platelets are gently resuspended.

The heating-cooling system is controlled by a precision microprocessor thermoregulator to keep

the chamber temperature constant for optimal platelet survival.

The temperature of the chamber is continuously monitored by a graphic thermal chart recorder. This is independent from the mains supply to detect and record deviations during power failures.

The incubator is fitted with an "out of temperature" alarm circuit. A "stop detection" alarm can also be fitted on request which is designed to interface with centralised laboratory alarm detection systems.

The rotators or shakers are equipped with reliable long life low voltage 12 V dc electric motors The rotators or shakers are equipped with reliable long life low voltage 12 Vdc motors, for added safety.

The rotator assemblies are easily removed from the chamber for routine cleaning operations. The power supply jack is disconnected and the units simply slide out.

The RTB equipments are made to the highest standards and comply with current EC directives.

Dimensions: 930 x 550 x 490 h

Chamber volume: 115 litres

Rotation Speed; rotating shakers: 3 to 30 RPM; linear shakers 6 to 60 strokes/min

Temperature: Fully Adjustable 0 C to 40 C

Temperature alarm : Fully adjustable sensitivity

Rotation Alarm: Immediate If rotators stops

Air exchange: Pump capacity 300 litres/hour

Supply Voltage: 230 volts/ 50 Hz/ 160 W

RTB 4010 32 donor bags

RTB 4050/5 5 shelves 500 x 380 mm

RTB 4050/7 7 shelves 500 x 380 mm

RTB 4050/10 10 shelves 500 x 380 mm